IntenCity Lighting, Sea Turtle Safe

The IntenCity Sea Turtle Safe Light

Features

Amber LEDs (that Sea Turtles can't see)
Same Monochromatic color emission as LPS (Low Pressure Sodium)
without the environmental problems

Sharp Cutoff, International Dark Sky Compliant

Low EPA (Effective Projected Area) for lowest wind-load of any luminaire.
Wind tunnel tested to 150+ MPH winds. Unique integral Down Looking Photocell
requires no opening in housing, no wiring, and outlasts LEDs.

Sealed light engine has no air intake and never needs internal cleaning.

No Ballast. High PF current regulated, solid-state power supply,
completely encapsulated for weather resistance.
Integral 7KA 180-Joule MOV transient protection.

Mounting made easy. Unique pipe mounting system ensures integrity
and seal with single-point tightening system.
No more saddle clamps or bolts to torque.

We are
IntenCity Lighting

Capabilities

Inside Our Products

Outdoor Lighting

IntenCity Streetlight

Sea Turtle Safe

Indoor Lighting

Interior Applications

About Parking Garages

Garage Luminaire Info

Application Tools

Photometrics & Data

Frequently Asked Questions

Community Forum

Printable Page

"Conventional bulb type HID fixtures have socketed bulb connections and can't easily be sealed from the blowing rain and salt environment. Also, LPS fixtures have a large cross sectional wind load area, making them vulnerable to even moderate winds.

With those things, surviving a hurricane season is a year closer to electrical or functional failure."

Specifications

Lighting System
Light Emitting Diodes
Input Power
65VA, PF > 0.95
Operating Voltage
100 to 277VAC, 47 to 63 Hz.
Humidity
0 - 99%
Dust and Moisture
IP66 rating (no intrusion)
Operating Temperature
-40° C to 55° C
(electronics to 70°C)
Storage Temperature
-40° C to 85° C
Finish
Black Anodized
Dimensions
4 3/8" H x 16" W x 17.5" L
Mounting
Single-point tightener to existing 1.5" or 2" pipe
Weight
13 lbs
Connections
3x 12" 16 AWG wire leads
Emission Color
590 nm (Amber)
Lumens
approx. 1,600
Compliance to Codes & Standards
UL-C, NEC, NEMA,
FCC Part 15 Class B
Photocell
ON < 1 foot-candle, OFF @ > 1.5

General
Light weight. Sharp optical cutoff, limited trespass, non-glare, 10+ year design life. Lumen Maintenance 70% after 50,000 hours at 30° C ambient.

Construction
Heavy gauge aluminum extrusion, black anodized finish. Injection molded polycarbonate lens with O-ring seal. Door opens for electrical connections and installation.

Applications
Solid-state lighting system for:
- Replacement of LPS
- Coastal Parking lots
- Sub-zero temperatures

Replaces 100 watt Low Pressure Sodium luminaires for half the energy.

Installation
Luminaire mounts to standard pipe fitting of streetlight mast or pole with proprietary single point tightening system. Three wire electrical connection. Photocell is active in all units, may be defeated if desired.

Optional Building/Wall mount

References

turtletime.org Technical Reports

Artificial Lighting & Hatchling Behavior
Florida Marine Research Institute

Coastal Protection for Sea Turtles
in Florida

See Photometrics page for IES files and data sheets.

IsoFootcandle Chart