IntenCity Lighting Mast Logo

The IntenCity Parking Garage Luminaire

Features

Designed specifically for single-row layout.
Mounts to existing electrical box in single or double-row designs.
Doesn't require new or closer spaced electrical service.

New construction can get more luminaires per circuit, less copper required.

No Hot-Spot beneath luminaire.
Doesn't produce it, no wasted energy by masking it off.

Unique integral Down Looking Photocell can control either wing for
perimeter lighting control and further power reduction.
Control system has longest rated life in the industry, outlasts LEDs.

White and Amber LEDs (Light Emitting Diodes) with
proprietary optics, renders all colors naturally. 
Sealed light engine has no air intake, never needs internal cleaning,
and permits direct external pressure washing. 

No Ballast.  High PF current regulated, solid-state power supply,
completely encapsulated for weather resistance. 
Integral 7KA 180-Joule MOV transient protection.

Unique mounting system supports luminare before wiring
and locks at 5° increments around full rotation.




 
Specifications

Lighting System
Light Emitting Diodes
Input Power
80VA, PF > 0.95
Operating Voltage
100 to 277VAC, 47 to 63 Hz.
Humidity
0 - 99%
Dust and Moisture
IP66 rating (no intrusion)






Operating Temperature
-40° C to 55° C
(electronics to 70°C)
Storage Temperature
-40° C to 85° C
Finish
Black Anodized
Dimensions
4 3/8" H x 16" W x 11" L
Mounting
Single-point hanger to NEMA electrical box
Weight
14 lbs
Connections
3x 12" 16 AWG wire leads
Photocell
ON < 1 foot-candle, OFF @ > 1.5
Emission Color
3,900° K CCT
Lumens
approx. 2,000
Compliance to Codes & Standards
UL-C, NEC, NEMA,
FCC Part 15 Class B
  General
Light weight, sharp optical cutoff,
limited trespass, non-glare,
10+ year design life. 
Lumen Maintenance:
70% after 50,000 hours at 30°C amb.

Applications
Solid-state lighting system to:
- Replace HPS, Metal Halide
- Replace Fluorescent
- Perform at sub-zero temperatures





Construction
Heavy gauge aluminum extrusion, black anodized finish, vandal proof fasteners.
Injection molded polycarbonate lens with O-ring seal. Door opens for electrical connections and installation.

Replaces 100 watt High Pressure Sodium luminaires for half the energy.

Installation
Luminaire mounts to standard NEMA electrical box using proprietary single-point locking system.  Three wire electrical connection.  Photocell is active in all units, may be defeated if desired.

Options:
- LED color:  Cool White;
- Single wing wall mount version


See Photometrics page for data sheets and IES files.
 


        Cone Diagram, click to expand
garage light cone diagram
IntenCity Luminaires are designed to provide NPA & IESNA recommended lighting with multiple luminaires mounted in a single row config. on 20-ft centers.

A system has overlapping emissions for ceiling and far walls of adjacent parking stalls for vertical coverage.
Lighting layout software should be used during the design to position luminaires for desired luminance levels.
See Viewers here for layout software and IES files.


© 2007 IntenCity Lighting, Inc.  All rights reserved.